| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
How To Make a One-Way Valved Lid
Step 11
| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
Now notice carefully the cutout in the wood below. That is important. By placing the lid over this cutout, you can suspend the lid while the epoxy dries. Here I'm about to press down on the valve, snapping it into place.
| Home |1
| |2
| |3
| |4
| |5
| |6
| |7
| |8
| |9
| |10
| |11
| |12
| |13
| |14
| Home |
Copyright © 1999 - 2004 KKS Associates. All rights reserved