| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
How To Make a One-Way Valved Lid
Step 10
| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
Ugh. I really wish I could get a better close-up. What we have here is what was supposed to be a close-up showing the epoxy applied to the ridge. What you can sort of make out is that the ridge is filled in all the way around with epoxy. I'm holding the valve so as not to get any epoxy on my hand.
| Home |1
| |2
| |3
| |4
| |5
| |6
| |7
| |8
| |9
| |10
| |11
| |12
| |13
| |14
| Home |
Copyright © 1999 - 2004 KKS Associates. All rights reserved