| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
How To Make a One-Way Valved Lid
Step 4
| Home |1 | |2 | |3 | |4 | |5 | |6 | |7 | |8 | |9 | |10 | |11 | |12 | |13 | |14 | Home |
I don't push very hard when I drill. I let the outer edge of the bit slowly work its way through the metal.
| Home |1
| |2
| |3
| |4
| |5
| |6
| |7
| |8
| |9
| |10
| |11
| |12
| |13
| |14
| Home |
Copyright © 1999 - 2004 KKS Associates. All rights reserved